金沙手机娱乐网址,奥门金沙手机娱乐网址

您好!欢迎来访金沙手机娱乐网址!关于我们 | 联系我们 | 在线留言
全国统一服务热线
13793968666(来经理)
联系我们
联系人:王经理
联系电话:13793968666
地址:山东省东营市广饶县
常见问题

挖掘机的控制安全阀是否可以随意转移和更换?

日期:2021-01-13   来源:
近段时间,很多车主问小编挖掘机上的控制安全阀是否可以随意转移和更换。因此,加金沙手机娱乐网址长臂挖掘机出租的小编今天来跟大家谈一谈挖掘机的控制安全阀是否可以随意转移和更换。
Recently, many car owners ask whether the control safety valve on the small excavator can be transferred and replaced at will. Therefore, Xiao Bian, who rented the lengthened arm excavator, came to talk with you today about whether the control safety valve of the excavator can be transferred and replaced at will.
首 先,小编在此强调,挖掘机控制安全阀不得随意移动。
First of all, Xiaobian emphasizes that the excavator control safety valve shall not be moved at will.
由于安全阀是挖掘机的重要保护部件,如果擅自转移,将直接导致挖掘机无法 正常工作。
As the safety valve is an important protective part of the excavator, if it is transferred without authorization, it will directly lead to the normal operation of the excavator.
正确的调试方法应在试验台上进行,应根据相应的要求控制转数,并随时观察泵阀压力。通常情况下,测量范围为40兆帕的压力表与主输油管道上的测压口相连,在观察的同时进行调试。
The correct debugging method should be carried out on the test bench, the number of revolutions should be controlled according to the corresponding requirements, and the pump valve pressure should be observed at any time. Normally, a pressure gauge with a measuring range of 40 MPa is connected with the pressure tap on the main oil pipeline, and it can be debugged while observing.
一般情况下,将挖掘机举至顶部,加大油门,仪表显示为35MPa。达到要求后立即停止。如果安全阀设置过高,液压设备将失去其保护装置功能。
Under normal circumstances, lift the excavator to the top, increase the throttle, and the meter shows 35MPa. Stop immediately after meeting the requirements. If the safety valve is set too high, the hydraulic equipment will lose its protection function.
因此,在正常情况下,不要随意移动挖掘机控制安全阀。如果有必要搬家,也要严格遵守规则。你学会了吗?
Therefore, under normal circumstances, do not move the excavator control safety valve at will. If it's necessary to move, follow the rules. Have you learned?
?
  • 13793968666
  • 返回顶部

【金沙手机娱乐网址图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】

XML 地图 | Sitemap 地图